BTR LS3 Stage 3 V2 Camshaft

227/24X .636"/.636" 111.5 LSA

INTAKE LOBE LIFT @ TDC: 0.06241

Developed and ground in-house using state of the art BTR designed lobes, the new LS3 Stage 3 V2 cam is the latest offering in the LS3 line up. This camshaft has an aggressive idle, and works well in the mid to upper rpm range with a 70 horsepower gain at peak. This camshaft will not require any flycutting of pistons with OEM LS3 combustion chamber size. If you mill your heads, it is always advised to check piston-to-valve clearance.

An aftermarket stall is necessary to help  unlock this camshaft's full potential.

These new BTR lobe designs were Spintron and Engine Dyno tested to achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards.

Requires the use of our .660" Lift Platinum spring kit and hardened pushrods.

Options:

• Cam Only
• Cam, .660" Dual Valve Spring Kit w/ Steel Retainers, & BTR 7.400" 5/16" Chromoly Pushrods
• Cam, .660" Dual Valve Spring Kit w/ Titanium Retainers, & BTR 7.400" 5/16" Chromoly Pushrods