TRP 10-15 L99 DOD/AFM/VVT Delete Kit w/ TRP LS3 N/A Cam Kit

Want to remove the factory AFM/DOD lifters from your Camaro SS or G8 GT and add a nice bump in horsepower while you're at it? This is the kit you are looking for.

This kit is for vehicles with the 8th digit of the vin number "Y" "2" and "J" Camaro/Caprice PPV/G8 GT

DOD/VVT Delete Kit Includes:

1. Non-DOD Valley Cover w/o PCV Provision (comes with gasket and bolts)
   
2. Your Choice of Lifters
   
3. GM LS Lifter Trays x4 12595365 (not included with 2116LSR lifters)
   
4. TRP LS3 MLS Head Gasket Set TRP10046 (call/text/email to sub to LS9's)
   
5. TRP 2004+ LS Head Bolt Set TRP00568
   
6. GM Crank Bolt 12557840
   
7. TRP MLS Exhaust Manifold Gasket Set TRP17944
   
8. TRP Valve Cover Gasket Set TRP12045
   
9. TRP Timing Chain Dampener TRP88670
   
10. ARP LS Cam Bolts 134-1003
    
11. TRP Water Pump Gaskets x2 TRP30223
    
12. TRP 58X 4 Pole 3 Bolt Timing Gear TRP86481
    
13. TRP Camshaft Retainer Thrust Plate TRP89016
    
14. GM Timing Chain Cover w/ Cam Sensor, Gasket & Bolts 12633906
    
15. VVT TO NON-VVT Adapter Harness

Cam Kit Includes:

1. Your Choice Of Camshaft
   
2. TRP .660" Dual Valve Spring Kit w/ Steel or Titanium Retainers
   
3. TRP 7.400" 5/16" .080" wall Chromoly Pushrods (call/text/email if other size needed, 7.400 WILL NOT WORK WITH JOHNSON LIFTERS)

Cam Specs: (For more cam information, go to the TRP Camshafts page under Camshafts & Valvetrain)

• LS3 Stage 1 N/A Camshaft: 218/230 .612"/.595" 113 LSA - Works w/ Stock Converter
• LS3 Stage 2 N/A Camshaft: 224/240 .638"/.629" 113 LSA - 2800+ Stall Required
• LS3 Stage 3 N/A Camshaft: 230/248 .638"/.638" 112 LSA - 3400+ Stall Required
• LS3 Stage 4 N/A Camshaft 234/252 .638"/.638" 112 LSA 3800+ Stall Required

Notes:

• Stage 4 you CANNOT mill your cylinder heads without the possibility of having to fly cut your pistons. (Very important to check clearance)
• Timing chain and oil pump not included.
• Factory length 7.400" Pushrods WILL NOT WORK with Johnson lifters. If you select any of the Johnson lifters, you will have to purchase a pushrod length checker (part number TRP-PLC1). We can hold the pushrods until you get us a measurement, and we can send the correct length pushrods. Please call/text/email us after your purchase and tell us to leave off the pushrods or leave a note in the bottom of your cart before you check out.